GIFT SETS
SHOP NOW
Popular searches

Gold rings need a slightly gentler hand than silver or steel, mainly because "gold" can mean two different things depending on the piece. Get the method right for yours and a clean takes five minutes. Get it wrong and you can dull a finish that should have lasted for years.
Here's exactly how to clean both types of gold ring we make, and how to tell which one you own.
Jump to:
18K gold vermeil is real gold, bonded in a proper thickness over a solid sterling silver base. It's the closer of the two to fine jewellery, and it ages a little like it too, developing character over years of wear rather than staying static.
Gold-plated stainless steel is our everyday range, a steel core finished in 18K gold with rhodium underneath for extra durability. It's built specifically for daily wear: gym, showers you forget to take it off before, the lot. The trade-off is that the gold layer itself is thinner than vermeil, so it still deserves a gentler clean than the steel underneath would suggest.
Not sure which one you've got? Check the product page. If it says "gold vermeil," treat it like the softer, more precious piece. Everything else in our rings range that isn't marked vermeil, sterling silver, or tungsten is gold-plated stainless steel. For the full breakdown of how each is actually made, our 18K gold vs gold vermeil guide covers it in more depth.
Fill a bowl with cold or lukewarm water, never hot, and add a couple of drops of mild dishwashing liquid. Let the ring sit for a minute or two, then use a soft cloth rather than a brush to gently work over the surface. A toothbrush is fine for solid gold but can be too much for a vermeil layer, so keep the pressure light. Rinse under running water and pat dry immediately with a soft, lint-free cloth. Don't let it air dry, since sitting wet can dull the silver base underneath the gold.
Featured Ring: Enamel Virgin Mary Signet Ring (Gold)
The steel core gives you a bit more room to work with. Soak the ring in warm water with a few drops of mild dish soap for around 15 to 20 minutes to loosen any build-up, then use a soft-bristle toothbrush to clean gently around any engraved detail or signet face. Rinse thoroughly and dry with a soft cloth straight away. It's more forgiving than vermeil, but the plating is still thinner than solid gold, so stick to gentle pressure rather than heavy scrubbing.
Featured Ring: Square Signet Ring (Gold)
Skip chlorine, bleach, and anything abrasive, including baking soda paste, which works well on solid silver but is too rough for a plated gold surface. Toothpaste has the same problem: it's a popular myth, but it's genuinely abrasive enough to leave fine scratches on gold. Ultrasonic jewellery cleaners are worth avoiding too, since the vibration can work gold plating loose over time. When in doubt, mild soap and a soft cloth will always be the safer call over anything marketed as a stronger clean.
Featured Ring: Saint Benedict Band Ring (Gold)
Take gold rings off before swimming, showering, and the gym. Chlorine and prolonged sweat exposure are the two biggest causes of a plated finish wearing thin before its time. Let any perfume, aftershave, or hand cream dry completely before putting rings back on, since the chemicals in both can dull gold faster than daily wear alone. If your ring is part of a wider ring stack, our full guide to cleaning every ring material covers sterling silver and tungsten care too.
Whether you're after the real thing or our everyday gold-plated range, here are three worth a look.
Featured Ring: Round Band Ring (Gold)
A smooth 5mm band with a high-polish finish, designed for everyday wear, solo or stacked with the rest of your rotation. See the full band rings collection here.
Featured Ring: Bevelled Ring (18ct Gold Vermeil)
Handcrafted from sterling silver and rich 18K gold vermeil, with a bevelled outer edge and a brushed finish that wears effortlessly alone or stacked. See the full sterling silver rings collection here.
Featured Ring: Enamel Swallow Signet Ring (Gold)
An 18K gold signet featuring a swallow in flight on rich blue enamel, carrying a single rose set with a natural red gemstone. See the full signet rings collection here.
Gold vermeil is real gold bonded over a solid sterling silver base. Gold-plated stainless steel uses a steel core finished in gold with rhodium underneath. Vermeil is the more precious of the two; gold-plated stainless steel is built for tougher daily wear.
Any plated or vermeil piece can show wear eventually, usually after years of daily contact. Gentle cleaning and taking rings off before swimming or the gym will slow this down considerably.
It's best not to. Soap residue and prolonged water contact can dull the finish faster than normal wear, so it's worth building the habit of taking it off first.
With proper care, our gold-plated stainless steel pieces are built to resist fading for years of regular wear. How long any plated piece lasts comes down to how it's cleaned and how often it's exposed to water, sweat, and chemicals. Our full breakdown on gold-plated jewellery lifespan goes into more detail.
We'd avoid it. Most shop-bought jewellery cleaners are formulated for solid gold and can be too harsh for a vermeil layer. Mild soap and water is the safer, and just as effective, option.
Real gold or gold-plated, both are built to earn their place in daily rotation when they're looked after properly. Browse the full range here.
Dejar un comentario
Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.